Are all trailer axles the same?


Are all trailer axles the same? In almost all cases 3,500 lb axles will all use the same bearings. If your trailer has a Lippert or Dexter 3,500 lb axle then yeah they would be the same.

How do I know what axles my trailer has? If you bought a company-made trailer (as opposed to building one yourself from a kit) there should be a tag with the VIN, weight and capacities all there for you. You should find it on the driver’s side of the trailer. A second way to determine the size axle you need is to measure the diameter of your existing axle.

What are the different types of trailer axles? Trailer axles are normally divided into two different types: Spring axles and torsion axles. While these two types of axles perform the same basic job, the way they go about suspending and cushioning the trailer load is completely different.

Are trailer axles standard size? There isn’t a set dimension for that on trailers. Typically axles are custom ordered to the specs needed.

Are all trailer axles the same? – Related Questions

Can I upgrade my trailer axles?

It’s definitely possible to upgrade a trailer’s axle rating to a higher rating by just swapping the axles. To pick out the correct axle you’ll need to measure the distance between the hub faces and the spring seat centers and you’ll know which will fit as a replacement.

Which axle should trailer brakes be on?

Typically trailers will carry more of their weight on the front of the trailer, so you would want to put the brakes on the front axle as it will most likely carry more weight while braking. Also, when braking, weight will shift forward from the inertia of the stop, so that would put more weight on the front axle.

What are trailer house axles rated for?

[3] Standard mobile home application uses axles rated at 6000# or 7000# with 14.5 x 6 doughnut rims rated at 3000# each & 14.5 x 7 rims rated at 3500# each.

Are trailer axles straight?

Are all trailer axles straight? Nope. As we explained above, a slight bow in your trailer axle is desired to help deflect the weight of the vertical load over it. This helps keep the wheels in the proper camber to avoid uneven tread wear.

Should my trailer axle bow up or down?

A trailer axle should actually be bowed upwards in the middle and not downwards. When the trailer is loaded with your boat, that upward bow will flatten out and your tires will make even contact with the ground.

How long do trailer axles last?

Subject: RE: Rubber Torsion Axle Life Expectancy? the lifespan is 15-20 years. no matter how many miles towed or how stored (weight off frame, etc.)

Do trailer axles have serial numbers?

You will have to have the serial number of your axle. It is on the axle as either a sticker or actually stamped into the tube. You will have to have the serial number of your axle. It is on the axle as either a sticker or actually stamped into the tube.

What is a 4 drop axle?

Drop axles are similar to standard spring axles, but the spindles at the end of the tube bend up. This puts the hub higher up, generally lowering the axle closer to the ground by 4 inches center-to-center. This allows the trailer to sit lower to the ground.

Can I put a heavier axle on my trailer?

Yes, you can get a different axle for a trailer. However, you will also need to upgrade the suspension and the tires and wheels. Also, the trailer frame may need additional support. The hub face is where the wheel touches the hub.

Can I put bigger axles on my trailer?

It boils down to: Yes you can put bigger axles under your trailer to eliminate axle strain and improve the axle capacity.

Can I add a second axle to my trailer?

You could add a second axle to a trailer that doubles its axle capacity but this does not ensure the other parts of the trailer, such as its frame or coupler, have that same doubled capacity.

Should both trailer axles have brakes?

With all of this in mind, we always recommend adding brakes to both axles of a tandem axle trailer. When just one axle of a tandem axle trailer is equipped with brakes your tow vehicle is going to be doing a lot of the work when applying the brakes. This is going to have a negative affect on your truck as well.

Does my trailer need brakes on both axles?

All tandem axle trailers are required to have brakes on at least one axle, and some state-specific laws may require both axles to have brakes. Lastly, all single axles trailers rated at or above 3,000 lbs GVWR are required to have a brake axle.

At what weight do you need trailer brakes?

In California, brakes are required on any trailer coach or camp trailer having a gross weight of 1500 lbs. or more. Usually the braking capacity on tow vehicles is good; however, it may not be good enough to safely stop the several hundred to several thousand additional pounds that your trailer weighs.

How much are mobile home axles worth?

About $100-150 per axle..and you can get $20 each out of a “good” tire and clamp style rim.

What is the weight limit on a mobile home axle?

The main factor that goes into a utility trailer’s weight limit is the load rating of its axle. Trailer axles are rated based on their diameter, which helps determine their overall strength. The thicker the axle, the more weight it can carry, and most axles can carry somewhere between 1,000 and 10,000 pounds.

How do you move a trailer without wheels?

The best way to move a car without wheels is to pull it along the ground with a winch. You can pull the car into a trailer, which you can then use to transport the vehicle to your desired location.

Can you fix a bent trailer axle?

Most trailers that are constructed for consumer use have tubular steel axles. They are easily bent during an uncontrolled skid or collision. Fortunately, replacing the axle is not necessary unless it is extensively damaged. With welding skills and attention to detail, axle repair is possible.

Are trailer axles straight or curved?

Most trailer axles are designed with a “bend” in the tube that will deflect when the load (weight of the trailer) is applied. This will theoretically bring the trailer wheel camber toward a 0 value that is the best setting for most trailer applications.

Why does my trailer tire look slanted?

It sounds like your trailer has been overloaded at some point which might have bent the axle or the spindles. If the inside edges of your tires are more worn than the outsides, it’s a sure sign the axle is bent. While you’re at it, also check the suspension components, making sure there’s no broken or worn parts.

Do rubber torsion axles wear out?

Over time the axle will wear out, the rubber elastomer will deteriorate with use and age.


Leave a Reply

Your email address will not be published. Required fields are marked *