How do you put sandpaper on a drum sander?

Does a drum sander use sandpaper? A drum sander is a completely different tool in that a loop of sandpaper continually moves around the drum, ripping down the wood as far as you want to go. With an orbital floor sander, it’s hard to go wrong, since it’s difficult to take off too much wood.

What kind of sandpaper do you use on a drum sander? Most times, I have either 80 or 120 grit paper on the drum. This grit is perfect for removing milling marks from the planer. And although I recommend against heavy thicknessing, these lower grits will certainly allow you to sneak up on the exact thickness you are looking for.

Is a drum sander worth the money? A stationary drum sander is a great tool for a smoothing everything from narrow strips to wide panels, while producing parts of consistent thickness. Better units, like the SuperMax 16-32 shown here (with its 16″-wide drum, and open-end design), may cost more than a sander with a drum housed on both ends.

How do you put sandpaper on a drum sander? – Related Questions

What can a drum sander be used for?

A drum floor sander, also known as a belt sander, is a heavy-duty machine designed for heavy sanding of solid wood flooring. A drum sander cuts through the wood, obliterating multiple layers of wood as well as any varnish, giving you a new surface to refinish.

What size drum sander should I get?

Open drum 16″ sander – JET 16-32

After my experiences building cabinets, for cabinets and furniture you’ll want a sander with at least a 32″ reversible capacity. At this size you’ll be able to: Sand all end panels and cabinet door. Tackle most base cabinet face frames (as most are 31-32″)

How much sandpaper do I need for a drum sander?

For the large drum sander, we used about 12 sheets of 24 grit, 8 sheets of 40 grit paper, 8 sheets of 80 grit paper and 5 sheets of 120 grit paper. For the edging sander, we used about the same amount of each grit again.

What is 400 grit sandpaper used for?

180 to 220 Grit Sandpaper: Finer grit sandpaper is great for removing the scratches left by coarser grits on unfinished wood and for lightly sanding between coats of paint. 320 to 400 Grit Sandpaper: Very fine grit sandpaper is used for light sanding between coats of finish and to sand metal and other hard surfaces.

Can you use a drum sander as a planer?

Drum sanders are great for fine surfacing or sanding wood, especially figured woods that tear out under planer blades, but it is not the best tool for removing large amounts of wood, such as you would do when leveling glued up boards or surfacing stock.” A drum sander is not made for the rigors of abrasive planing.

How do you replace the paper on a drum sander?

Roll the drum until the paper slot is facing you and adjust the cams so the arrows printed on the cams are facing you. The left arrow should point down, while the right arrow points up. Insert one end of the paper into the slot (pictured) and turn the drum around so that the paper wraps around the drum.

When should you replace sanding paper?

You should change your sandpaper when it gets too clogged by the material you are sanding or if the abrasive side is too worn down to smooth out your surface. If you have noticed that you have to apply much more pressure or it takes too long to work, you should substitute your sandpaper.

Is a drum sander necessary?

“If your floor is in rough shape, cupped or damaged, or has a very heavy finish, a drum sander is what you need,” he adds. “An orbital won’t relevel your floor.”

How accurate is a drum sander?

I can get accuracy to 0.005 – that’s five thousandths of an inch — with the drum sander. A drum sander’s the only way to get that kind of precision. And I love the variable feed rate because not every piece of wood has the same characteristics. I can feed it fast or slow and adjust it as I go.

Who makes drum sanders?

SuperMax Tools has continued to manufacture select larger models of drum and brush sanders in the US. We have also developed innovative changes to smaller models of drum sanders, releasing the award-winning 19-38 Drum Sander in 2011, and have continued to expand our product line.

How long does it take to sand a floor with a drum sander?

How long will it take? Three sanding passes with both the drum sander and the edger in one room of 140 sq. ft. takes the average customer, working alone, 5 hours.

How thin can a drum sander sand?

One can sand material up to 3”-thick, as thin as 1/32” and anywhere in- between. Unlike planers which often have a minimum length requirement of a foot or more, the JET 16-32 Plus Drum Sander can safely handle pieces as short as 2 ¼”. The open frame design also lets you sand pieces up to 32”-wide by making two passes.

How fast should a drum sander run?

18″ drums should have a motor running at 1725 RPM (the balanced drive system will cause the speed to encrease to 2250 RPM). the 24″ and 30″ drums require a 1/2 HP motor running 1725 RPM. Under NO circumstances should the 24″ or 30″ drums run any faster.

What grit sandpaper do you use to sand hardwood floors?

Start with 36-grit sandpaper for a floor that hasn’t been sanded in a long time or that has a lot of heavy finish on it. Floors that have been painted may even require you to go tougher and use 24 or 16-grit paper. Maple floors are so hard that they often require 36-grit sandpaper as well.

Can I use a hand sander to sand a floor?

The handheld belt sander can sand off old finish and sand out dents and scratches much more easily than the previous sanders. While it won’t keep up with the speed of a normal floor sander, the hand held belt sander will get the job moving forward with reasonable speed.

How many sanding sheets do you need to sand a floor?

8 sheets of 80 grit sandpaper. 5 sheets of 120 grit sandpaper. Optional: Woodstain (if you wish to colour your floor) Varnish (any gloss level – but satin finish is recommended for contemporary looks, minimised glare and less visible imperfections)

Can you sand an entire floor with an edger?

Well, you can remove edger swirl with a palm sander, but it can lead to an uneven, “apaloosa” effect. If you insist on using a palm sander, either use it over the entire floor (not recommended) or hand sand with 80grit over the areas that you palm sanded.

What does 60 grit sandpaper mean?

Rather, the number scale refers to the number of holes per square inch in the screens that are used when sieving the abrasive grains during the sandpaper’s manufacture. For example, in 60-grit sandpaper, the abrasive particles used in the paper were sieved through a screen that had 60 holes per square inch.

How do you know when sandpaper is done?

The easiest way to tell when it’s time to change the sandpaper is to run your finger lightly over the part of the paper you’ve been using, and do the same over a part that is still new – the part that is wrapped around a sanding block, for example.)

What is the difference between a planer and a drum sander?

The difference is that the purpose of the planer is to cut wood to size, and the purpose of the drum sander is to sand. If you’re looking to create a different depth for the wood, especially thick pieces, the planer would be the tool to use.

What Sander should I use to sand my deck?

A random orbital sander is a specialized tool that sands wood in an elliptical pattern and it’s the most efficient sander to use when refinishing a deck. Random orbital sanders are easy to use and are effective for this task.