How much does it cost to get rear brakes done?


How much does it cost to get rear brakes done? The average cost of having your rear brake pads replaced starts at around $150 all the way up to $400+, depending on the vehicle and type of brake pads used.

What is the average cost for a rear brake job? Expect a brake job of replacing brake pads and rotors to cost $250-$400 per axle on average. If you drive a heavy-duty pickup truck and haul or tow a lot, your costs may go up quite a built.

How much should a brake job cost? A complete brake repair — one that includes pads, rotor and caliper replacement — typically averages between $300 and $800. However, depending on the make and model of your vehicle, you can easily spend more than $1,000 on a complete brake job.

Are rear brakes more expensive? In a perfect world, sure they are. Unfortunately, our world is festooned with imperfections, and higher prices for rear brakes just happens to be one of them. If you have rear disc brakes, this repair (with just the standard pad/rotor replacement) will run $25-$75 higher than the front brake repair, on average.

How much does it cost to get rear brakes done? – Related Questions

How much do back brakes cost?

The average brake pad replacement cost is $150 per axle, and can range from $100 per axle up to $300 per axle. There are a few other pieces of hardware that are found in the brake system which might need to be serviced as well, including calipers and rotors, but the most common service will be to replace brake pads.

Should you replace all 4 brake pads at once?

But, when changing brake pads, should you do all four at once? Well, first, you absolutely should replace both front or both rear brake pads at the same time. Unless something’s really wrong, one should be wearing out at about the same rate as the other.

How much is a brake job at Walmart?

However, Walmart does provide an at-home brake replacement service by Wrench Mobile Mechanic Service starting from $160. Walmart also sells brake pads and service tool kits for sedan and 4X4 models. To learn more about changing your brakes with Walmart, alternative locations, and more, keep on reading!

How many hours does a brake job take?

Generally, A Brake inspection takes 30 minutes to 1 hour to replace the brakes including rotors and pads, & other vehicle components. Originally Answered: How long should brake service normally take? With all the proper tools and equipments it should only take about 45 to an hour tops.

How much does Midas charge for a brake job?

Midas: Midas charges roughly $80 per hour for labor costs when working on brakes. They charge about $50 for a brake drum package, $60 to replace brake fluid, and upwards of $800 for a complete caliper and rotor job.

Can I just replace brake pads and not rotors?

Yes, but it depends on the condition of your brake rotors. If they aren’t damaged or thinned beyond the discard thickness, you can definitely change just the worn brake pads. As we know, brake rotors and brake pads work together.

How do I know if my rear brakes are working?

If you brake sufficiently hard, your rear brakes will also lock up. When the vehicle has stopped, go out to look at the skid marks. You’ll see that the front wheels have made skid marks in the gravel, and if there is loose gravel also behind your rear wheels, they’re working.

What happens if rear brakes go out?

When you drive with worn out brake pads, rotors, or calipers, you may find yourself slamming on the brake pedal more often to slow or stop the car. All this hard braking can wear your tires down quicker or cause them to become unbalanced, leading to uneven tire wear.

Are front brakes more important than rear?

Front brakes wear quicker than rear brakes because they do most of the stopping. Front brake rotors are usually vented and have fins sandwiched between the two surface, while rear rotors are usually solid metal discs.

Can you replace brake pads yourself?

You will be pleasantly surprised to find that you can change your car’s disc brake pads quickly, easily and without specialized tools. Doing it yourself also will save you a lot of money. In either case the rotors may also need to be replaced or “turned” on a brake lathe, a procedure not covered here.

How often should brakes be replaced?

As a general rule, you should get your brake pads replaced every 10,000 to 20,000 miles to keep wear to a minimum. When it comes to your rotors, you have a bit longer. Your rotors should be replaced between 50,000 and 70,000 miles to keep your brakes in peak health.

How long can you drive after brake pad warning light?

There’s many factors that determine how long brake pads last after the warning light comes on, but there’s a rough estimate of around 1000 miles (1600 km) of driving where efficient braking will be maintained.

How long do rear brake pads last?

Many car manufacturers estimate that a braking pad can last anywhere from 20,000 to 70,000 miles. However, on average, most car owners replace their brake pads after about 40,000 miles.

Why do rear brake pads wear faster?

Usually, it’s the front ones that wear faster, NAPA explains. That’s because braking shifts the car’s weight forward, which means the front rotors need to be stronger, NAPA explains. But there is a reason why rear brake pads can wear faster than expected: traction control and electronic stability control.

Should you use front or rear brakes on bike?

Experienced cyclists will begin to develop advanced braking techniques, especially for fast riders. The front brake is ultimately the most effective stopping power, while the rear brake is ideally for regulating speed, rough terrain, and bad traction conditions.

Does Jiffy Lube change brakes?

Jiffy Lube® provides brake replacement without stopping your day. Whether you need pads, shoes, rotors or drums, a Jiffy Lube® brake service helps get your vehicle brake system back to manufacturer specifications.

Does Costco Auto do brakes?

Costco does not offer brake pad replacement services, nor does it sell brake pads in-store or online. It does, however, offer a discount for Costco members at any partnering stores via its Auto Program. With this discount, you can enjoy 15% off on services, items, and accessories, including brake pad replacement.

How long does it take to change all 4 brakes?

But exactly how long does it take to replace brakes and rotors? Due to the fact that various components that make up the brake system are subject to wear and tear, they will need to be replaced. This process can take expert mechanics anywhere from thirty minutes to one hour.

Should I replace all 4 rotors?

Although it is recommended by Ford to replace all four wheel brakes at the same time for safety, your idea should be OK. If you decide to get them replaced, consider enlisting a certified mobile mechanic who can service your brake pads and rotors at your own convenience.

Do I need new rotors or just pads?

The most complete brake service includes fully replacing brake pads and rotors, which gives you better stopping power and more fade resistance. Like brake pads, brake rotors wear out over time. But for optimum brake performance and safety, always choose to replace your brake rotors when replacing your brake pads.

Can you replace just rear brakes?

You can replace your brake pads in pairs (the front or the rear) at the same time or separately. If your front brake pads are in need of repair or replacement, your mechanic can fix this issue independently. It’s also important to note that your front and rear brake pads wear at very different rates.


Leave a Reply

Your email address will not be published. Required fields are marked *