How much horsepower does a 350 rocket have? 350. Produced from 1968–1980, the Rocket 350 was entirely different from the other GM divisions’ 350s. It used a very oversquare 4.057 in (103.0 mm) bore and Oldsmobile small-block standard 3.385 in (86.0 mm) stroke for 350 cu in (5.7 L). Output ranged from 160-325 hp (119-242 kW).

How much does it cost to rebuild a 350 rocket? $600 to $3,500 depending upon how involved you want to get with the thing. Generally, for a “good” rebuild that doesn’t really get beyond ‘mild 350’ standards, you’re looking at about $1,600-2,500 depending upon location.

How much horsepower does a 455 rocket have? They rated the standard issue 455 at 350 HP and the high-performance stage I version at 360 HP. This engine had a short run starting in 1970.

How much horsepower does a 454 have? In staying with the standard bore/stroke combination of 4.25/4 inches, however, it is not uncommon to yield power outputs of greater than 650 horsepower from the 454 in race engine configurations.

How much horsepower does a 350 rocket have? – Related Questions

How much horsepower does a Buick 350 have?

The base model was rated at 350 hp (261 kW), while the 455 Stage 1 equipped with a single 4-barrel Rochester Quadrajet carburetor was rated at 360 hp (268 kW) at 4600 rpm. The regular 455 produced a rated 510 lb⋅ft (691 N⋅m) of torque at 2,800 rpm, more than any other muscle car engine.

Is a big block faster than a small block?

Big block engines are larger in size and weigh more, but they produce more consistent power and torque to overcome the weight. Small block engines are smaller for better acceleration and handling, but more recently built models can be just as powerful as big block engines.

Is Pontiac 455 and 400 the same block?

We took the question to David Butler of Butler Performance in Lawrenceburg, Tennessee, for his professional opinion. He advises, “With the exception of the mid- to late-1970s PN 500557 casting, we consider all Pontiac 400 blocks functionally identical. The 455 blocks from 1970 to 1976 are also functionally identical.

Is the Olds 455 a good engine?

The 455 now I have done a lot of these. Very good motor. Huge torque and power wth very little tweaking. A mild cam a decent carb and a set of headers will give more street power than most can use.

Is a 454 a good motor?

The Chevrolet 454 remains a favorite among performance enthusiasts because of the its power output and the availability of aftermarket parts for the engine.

How much horsepower can I get out of a 383 stroker?

The 383 stroker engines have been reported to achieve 330 horsepower with 410 foot-pounds of Torque, 395 horsepower with 410 foot-pounds of Torque and 395 horsepower with 410 foot-pounds of Torque.

How much horsepower do headers add to a 350?

The length of the primary tubing determines the effective rpm range, but headers can be worth 15-20 hp on the right application. Run on our restrictive two-barrel 350, the headers improved the power output to 248 hp and 365 lb-ft of torque, with consistent gains through the rev range.

Why do they call it a Buick nailhead?

When Buick replaced its overhead-valve inline-eight in 1953, the Nailhead became the company’s first pushrod V-8. The engine took its name from the small valve covers mounted on top of the heads. Under the valve covers, the vertically mounted valves created an almost hemispherical combustion chamber.

Why is a 327 better than a 350?

In the vehicle, it’s more of a matter of “gearing” than revs. A 327 with it’s shorter stroke would need shorter gears so it can GET to its revs, where a 350, with its slightly longer stroke and more torque output will pull a little taller gear than the 327 will.

What is the strongest Chevy engine?

Our fastest crate engine ever

As the power behind the 2019 Corvette ZR1, the new supercharged 6.2L LT5 represents the pinnacle of Chevrolet’s performance: It’s the most powerful engine ever offered in a Chevy production vehicle.

Is a 400 small block better than a 350?

A small block 350 and a 400 have an identical block design. Most accessories will fit either engine. The major difference is found in the casting numbers and the way they are balanced. Most 350 cubic inch engines are internally balanced whereas the 400 engines are not.

Is it cheaper to rebuild or replace an engine?

A scheduled overhaul is almost always less expensive than a new engine. Rebuilding to repair is usually cheaper than buying a new engine, too. You may save up to half of the cost of a new engine by rebuilding. However, sometimes rebuilding is not a good option.

How much HP can a stock 350 bottom end handle?

If it was rebuilt correctly, a completely stock bottom end – main bolts, cast crank, stock rods, cast pistons, is good to around 350 HP.

What is the most powerful small block engine?

The most powerful small block ever produced is the LS9 engine used in the current Corvette ZR1. It is rated at 638 horsepower, making it the most powerful engine ever produced by GM for a regular-production car.

Is the Chevy 396 a good engine?

The 396 is a good revving engine, so you’d want to run a steel crank so it would live at the rpm you’d have to run it to make HP. And probably a roller cam, as flat tappet cams in big blocks have a nasty habit of “going away” relatively easily.

What is the most powerful Pontiac engine?

The best Pontiac in Pontiac history just got better. The rear-drive G8, hailed here at AutoWeek and elsewhere in the wheeled world in its original rear-drive, 361-hp, 6.0-liter V8 form, now has a mighty 415-hp 6.2-liter V8 driving those rear wheels, making it the most powerful Pontiac ever.

How much horsepower can a Pontiac 400 make?

They found that the engine provided massive amounts of low-end torque and rock steady high RPM power output. The 389 posted numbers in the 330 horsepower range with a single spread-bore, four-barrel carburetor. The 400 pushed this number up to 360 horsepower, with the same Quadrajet single four-barrel.

Is a Pontiac 400 a good engine?

The Pontiac 400 engine was used as a high performance engine in sports cars, and it was used in large cars as a workhorse type engine, strong on power, though not as speedy as the higher performance engines. This was accomplished to a large extent by the use of carburetors.

How do I identify a 455 engine?

The numbers cast on the lower left corner of the engine block — or on the cylinder head — indicate the year the engine was manufactured. The casting numbers for a 455 include 395021F, 396021Fa and 231788L.