How often do you grease Dexter axles?

How often do you grease Dexter axles? Along with bearing adjustment, proper lubrication is essential to the current function and reliability of your trailer axle. Bearings should be lubricated every 12 months or 12,000 miles.

How often should I grease my trailer axles? If your trailer’s axle(s) are equipped with a grease zerk on the ends, the bearings must be greased every six months or 6,000 miles to ensure functionality. To apply the grease, remove the rubber plug from the axle end and place the grease gun on the zerk. Pump grease until new grease begins to appear.

How often should you grease EZ Lube axles? How Often Should Trailer Hub Bearings be Greased with EZ Lube Spindles Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use.

Can you over grease EZ Lube axles? You really cannot overfill them. There is a relief hole in the outer cover that the grease will come out of when full.

How often do you grease Dexter axles? – Related Questions

Can you put too much grease in a wheel bearing?

Too much grease volume (overgreasing) in a bearing cavity will cause the rotating bearing elements to begin churning the grease, pushing it out of the way, resulting in energy loss and rising temperatures.

Can you over grease trailer wheel bearings?

There’s no such thing as too much grease for bearings! It should be a tight fit to where you would have to use a tool or block of wood to get the grease cap in place. If one side is in further in the hub than the other side of the same cap then eventually it will work itself free.

What oil do you use for Dexter axles?

What Oil Should be Used in Dexter Oil Bath Hubs. Expert Reply: You’ll want to use a gear oil for the Trailer Hub and Drum Assembly # 8-219-20 that you referenced. 90 weight or 80w-90 would work well.

What grease does Dexter use in their axles?

As the trailer industry premium supplier of axles and greaseable suspension parts, Dexter engineers have formulated the ideal grease for use in production of Dexter axles. Dexter Grease is a lithium complex with NLGI No 2 consistency and has additives for corrosion and oxidation inhibitors.

Is Red N Tacky good for wheel bearings?

Lucas Red N Tacky Wheel bearing grease is certified by the National Lubricating Grease Institute and is ranked in the highest performance category there is. Featuring rust and oxidation preventative inhibitors that make this grease more water resistant. This Red grease is ideal for use with all trailer applications.

Are EZ Lube axles good?

EZ lube axles are nice, but never trust they are working 100%. Thankfully in this case the grease never reached the shoe material and stayed inside or I would be replacing the entire assembly instead of just a seal.

How do you know if you have EZ Lube axles?

If your spindle has a zerk on it then you have an E-Z lube spindle and you will want to use either the Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K if you have drum brakes or the part # AKIHUB-545-35-EZ-K if you don’t have brakes.

How much grease is in Dexter EZ Lube?

EZ lube axles take a TON of grease. 1/3 to 1/2 tube per regrease.

What kind of grease goes in a CV joint?

Body. Good grease for cv-joints should have 2/3 NLGI consistency number. Usually, NLGI number is written on the package.

Can you use bearing buddies on EZ Lube axles?

Yes you can use a Bearing Buddy on your current axle setup but you’ll have to remove the zerk/grease fitting. What you have now is an EZ lube spindle which allows you to push grease through the middle of the spindle but you can install a Bearing Buddy over one of these spindles and it will still work.

How much grease should you put in a bearing?

Using the chart and the formula, the bearing only needs 8 grams of grease every 10,000 hours. If your grease gun delivers around 1.35 grams per stroke, that means the bearing needs 6 strokes every 13 months; you could average it out to a stroke every 8 weeks or so.

Can you over grease mower spindles?

“GREASING MOWER SPINDLES” “Grease fittings on mower spindles are used for assembly only. DO NOT grease spindles or damage may occur to bearing seals”.

How often should I grease my wheel bearings?

You need to grease your travel wheel bearings at least once a year or every 10,000 to 12,000 miles, depending on which comes first.

How long does it take to grease trailer bearings?

Put the tire and lug nuts back into place.

Once it is secured, you can lower the car jacks and move on to the next tire. In all, this project may take you 1-3 hours, just depending on how easy it is to take apart all the pieces and how many tires you need to do.

How do I know if my bearing Buddy has enough grease?

You can manually check the Bearing Buddy to be sure it has enough grease. All you need to do is press the edge of the piston. If you can move or rock the piston it has enough grease.

What kind of grease do you use for trailer bearings?

The best grease for travel trailer wheel bearings is the Lucas Oil 10301 Heavy Duty Grease. It lasts 4X longer than regular grease, is virtually waterproof, and is stable in all temperatures. It’s the ultimate grease for high-speed bearing.

How do I convert oil to bath hubs to grease?

You’ll basically just need to remove as much of the oil from your hubs as you can and then pack them with grease instead of oil. Oil seals and caps seal better than grease seals and caps so to make the conversion you want to make is not hard at all.

What kind of oil do you put in trailer axles?

Recommended Synthetic Bearing Lubricant for Kodiak Oil Bath Hubs In your oil bath-type hubs you will want to use any 80- or 90-weight synthetic gear oil.

What is NLGI 2 Lithium grease?

Traveller Premium Heavy-Duty Lithium Complex NLGI #2 Grease is a premium high temperature lithium complex grease that is fortified with a special additive package to ensure high film strength, extreme pressure and anti-wear properties.

Is Lithium Grease OK for wheel bearings?

For example, lithium grease can be applied both in chassis and wheel bearing applications of transport vehicles. Traditionally, calcium greases were used for chassis, and sodium-based greases were utilized for wheel bearings.

Can red grease be used for wheel bearings?

You can use the red grease # L11390 for trailer wheel bearings if you wanted. You can also use wheel bearing grease # L11465 which is designed for use on trailer running gear, including wheel bearings. It also has a slightly higher temperature rating, 520 degrees, compared to 510 degrees for the red grease.

Leave a Reply

Your email address will not be published. Required fields are marked *