What oil do you use for a chainsaw blade? Petroleum-based bar oil has been the standard for chainsaws. Lightweight oil is used in winter and heavier oil in summer. Manufacturers of chainsaws make bar and chain oils specially blended for their machines to extend their lifespan, but if they are not available, the owner’s manual suggests alternatives.
What kind of oil can I use for my chainsaw blade? Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.
Can you use motor oil on a chainsaw blade? Chain saw bar and chain oil isn’t rated by SAE like traditional automobile motor oil. If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Can you use 10w30 for bar and chain oil? Can I Use 10w30 for Chainsaw Bar Oil? Yes, though it is not ideal for use in the winter. A 10w30 oil is multi-weight, meaning it will perform well in cold and heat. Yet 10w30 weight motor oil will be very tacky and viscous once the chainsaw heats up and starts to run.
Table of Contents
What oil do you use for a chainsaw blade? – Related Questions
Can you use wd40 on a chainsaw blade?
Before you put the chain back onto your chainsaw you will have to lubricate it to clean it, using WD-40® Multi-Use Product. Before refitting the chain into the chainsaw, wipe off all the excess residue and then reattach it to the guide bar.
Can I use gear oil as chain lube?
You can use gear oil if you want to, it will lubricate your chain. Some thinner motor lube will tend to spray off the chain when pedaling. I did an experiment and used chainsaw chain oil on my own chain on my fixed gear bike. It did a good job of lubricating the chain.
Can you use vegetable oil on a chainsaw?
Kitchen oils are not necessarily designed for use on a chainsaw in the long term which could cause maintenance issues, so we’d recommend the use of a vege oil designed for your chain.
What happens if you run a chainsaw without bar oil?
Without lubricant, the speed at which the chain moves over the chainsaw bar can cause some serious friction. A slowed-down chain and excessive fuel burning mean there’s a lot of friction between your bar and chain, which means a lot of heat is being produced that could do major damage to your saw.
How much bar oil should a chainsaw use?
When to Oil
Gas chainsaws use about one tank of bar and chain oil for every tank of fuel, so fill the reservoir every time you fill the tank.
Can I use vegetable oil instead of bar and chain oil?
Tips for replacing chain oil with vegetable oil: Use canola oil – Canola oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable oil is thinner – Vegetable oils have lower viscosities than the bar/chain lubricants and therefore flow more readily.
Is there a substitute for chainsaw bar oil?
Canola oil is another good substitute when you don’t have access to vegetable oil. It’s able to handle high heat and protect your chainsaw bar and chain from damaging friction. That is only if you keep it well lubricated while cutting. Canola oil is also better at handling lower outdoor temperatures than vegetable oil.